Table of Contents
Advertisement
4.3.5.1 CPU Power Management submenu
Menu Item
EIST
Turbo mode
Boot Performance mode
Power Limit 1 Enable
Power Limit 1 Clamp Mode
Power Limit 1 Power
Power Limit 1 Time Windows
4.3.6
AMI graphic Output Protocol Policy submenu
Menu Item
Output Select
4.3.7 PCI Subsystems Settings
Menu Item
Above 4G Decoding
BME DMA Mitigation
Hot-Plug support
SBC-C41-pITX
SBC-C41-pITX User Manual - Rev. First Edition: 1.0 - Last Edition: 1.1 - Author: A.R./S.B. - Reviewed by M.B. Copyright © 2021 SECO S.p.A.
Options
Description
Disabled / Enabled
Enables or disables Intel
Disabled / Enabled
Only Available when "EIST" is enabled. Enables or disables the Turbo Mode
Max performance
Select the performance state that the BIOS will set before OS handoff.
Max battery
Disabled / Enabled
Enables or disables Power Limit 1. When Enabled, the following menu items will appear-
Disabled / Enabled
When Power Limit 1 is Enabled, enables or disables the Clamp Mode
Auto / 3 / 4 / 5 / 6 / 7 /
Power Limit 1 in Watts. Auto will program Power Limit 1 based on silicon default support value.
8 / 9 / 10
Auto / 1 / 2 / 3 / 4 / 5 /
6 / 7 / 8 / 10 / 12 / 14 /
Power Limit 1 Time Window Value in Seconds. Auto will program the Power Limit 1 Time Window based on
16 / 20 / 24 / 28 / 32 /
silicon default support value
40 / 48 / 56 / 64 / 80 /
96 / 112 / 128
Options
Description
HDMI1
Output video interface selection
EDP1
Options
Description
Globally Enables or Disables 64bit capable Devices to be Decoded in Above 4G Address Space (Only if
Enabled / Disabled
System Supports 64 bit PCI Decoding)
Enabled / Disabled
Re-enable Bus Master Attribute, disabled during Pci enumeration for PCI Bridges after SMM Loocked
Globally Enables or Disables Hot-Plug support for the entire System. If System has Hot-Plug capable Slots
Enabled / Disabled
and this option set to Enabled, it provides a Setup screen for selecting PCI resource padding for Hot-Plug
®
SpeedStep
47
Advertisement
Table of Contents
