Seco SBC-C41-pITX User Manual page 61

Port 0
Port 1
4.4.3.5 SCC Configuration submenu
Menu Item
SCC SD Card Support
SCC eMMC Support
4.4.3.6 USB Configuration submenu
Menu Item
xHCI Pre-Boot Driver
xHCI Mode
USB Port Disable Override
USB Port #0
USB Port #1
USB Port #2
USB Port #3
USB Port #4
USB Port #5
USB 3 Port #0
USB 3 Port #1
USB 3 Port #2
XDCI Support
XDCI Disable Compliance Mode
SBC-C41-pITX
SBC-C41-pITX User Manual - Rev. First Edition: 1.0 - Last Edition: 1.1 - Author: A.R./S.B. - Reviewed by M.B. Copyright © 2021 SECO S.p.A.
Enabled / Disabled Enable / Disable SATA Port #x
Options Description
Enabled / Disabled Enable or Disable SCC SD Card Support
Enabled / Disabled Enable or Disable SCC eMMC Card Support
Options Description
Enable / Disable Enables or Disable the support for XHCI Pre-boot driver.
Once Disabled, the xHCI Controller would be function disabled, none of the USB devices will be detectable
Enable / Disable
and usable during the boot and in the OS. Do not disable it unless for debug purposes.
Allows enabling or disabling selectively each single USB port from reporting a device connection to the
Enable / Disable
controller.
Disable
Allows enabling or disabling the single USB Port #x. Once disabled, any USB device connected to the
PCI Mode
corresponding port will not be detected by the BIOS neither by the OS
Disable
Enables or Disables the XDCI (USB Device)
PCI Mode
Options to disable XHCI Link Compliance Mode. Default is FALSE to not disable Compliance Mode. Set
FALSE / TRUE
TRUE to disable Compliance Mode
61