Shutting Down The Vehicle - Labrie TOP SELECT Maintenance Manual

Figure 2-13 Master switch
7.
Chock all wheels.
8.
Put an "O S
FF
9.
Use safety props to block any system that could move by gravity (open tailgate, raised body, etc.).
10.
Drain all air tanks (see Figure 2-14).
11. Verify and inspect any security device and/or mechanism to make sure that there is no bypass
and that they are all functional.
DANGER!
Do not perform any repair or maintenance on a vehicle that has not been unloaded.
DANGER!
Before performing any type of welding, remove all remaining residues stuck between the
Maximizer and the body using water to prevent fire.
(for units equipped with the optional Maximizer)

Shutting Down the Vehicle

If the vehicle has to be stored for an extended period of time, follow the chassis manufacturer's
shutdown and maintenance requirements.
Also:
1. Park the vehicle on hard level ground, and apply the parking brake (see Figure 2-12).
2. Make sure that all moving parts are in their "home" position (tailgate, loading bucket, body, etc.).
3. Turn OFF, in sequence, the hydraulic pump, the electrical system, the engine and the master
switch (see Figure 2-13).
4.
Drain all air tanks.
" tag on the driver's wheel and on the front windshield.
ERVICE
Safety 23