Labrie TOP SELECT Maintenance Manual page 48

40 Monthly Visual Inspection
Figure 4-9 Roof and rail stoppers
11.
Make sure all bucket partitions (Figure 4-10) can be released and adjusted properly.
12.
Inspect access doors and rollers on the top sides.
13.
Make sure the manual release works properly.
14.
Inspect the side wall seals and the bottom seal. Make sure they are in good condition.
Figure 4-10 Bucket partition
15.
If the truck is equipped with partitions with air-actuated release, check the air distribution system.
Make sure the air hoses are in good condition (see Figure 4-11).
WARNING!
Apply the Lockout/Tagout procedure before performing the visual inspection.
Roof stoppers
Rail stopper