Monthly Visual Inspection - Labrie TOP SELECT Maintenance Manual

4
Monthly Visual
Inspection
This chapter outlines the general visual inspection
procedure for the T
N : This procedure may vary depending on what type
OTE
of options are installed on the vehicle (units may be
equipped with a Maximizer hydraulic system, a
series of bucket separators, and one or two loading
buckets). For more details on each of these
options, refer to the appropriate section in this
Manual.
While the body and loading buckets should be cleaned
out daily, the visual inspection should be done on a
monthly basis. This inspection includes the following
items:
 the loading bucket
 the roof
 the tailgate
 the body, and
 the chassis
Before carrying out the monthly visual inspection,
apply the following procedure:
1. Park the vehicle on safe, level ground and in a
place where it can be cleaned out.
2.
Ensure that the parking brake is applied.
3.
Make sure no one will come close to the vehicle
while you perform the visual inspection.
This inspection includes moving different pieces
of equipment such as the loading bucket(s), the
tailgate and the body, which can represent a risk to
anyone that comes too close to the truck.
The monthly visual inspection should take around half
an hour and should take place once the truck has been
cleaned up. If performed along with the preventive
maintenance program, it will help you keep the T
S ™ in good running and working condition.
ELECT
S ™.
OP ELECT
OP