Daily Cleaning Of Top Select ™ Body - Labrie TOP SELECT Maintenance Manual

28 General Cleanliness
Daily Cleaning of T
After dumping all the recycling materials out of the T
procedure:
WARNING!
Apply the Lockout/Tagout procedure before carrying out body cleaning operations.
WARNING!
Be sure to install the tailgate safety prop before entering the body.
N : For a T S
OTE OP ELECT
1. Start the truck's engine.
2. Turn ON the pump switch.
3. Open the tailgate enough to set the safety prop in place.
Figure 3-1 Tailgate safety prop
4. Set the tailgate safety prop (see Figure 3-1).
5. Raise the body about twelve (12) inches to help the water evacuate.
6. Lift the loading bucket(s) to open the roof.
7. Install the loading bucket safety pins (see Figure 2-11).
8.
Turn OFF the pump switch.
9.
Stop the truck's engine.
10.
Apply the Lockout/Tagout procedure (see Lockout/Tagout Procedure on page 22).
11.
Enter the body and proceed with the cleaning of the first partition (at the body front-end).
Using a shovel and a broom, remove as much residues as possible.
Use pressurized water to clean the rest.
S
OP ELECT
™ unit with a Maximizer installed, proceed to page 97.
™ Body
S ™ body, perform the following
OP ELECT