Lubrication; Recommended Lubricants; Grease; Hydraulic Oil - Labrie TOP SELECT Maintenance Manual

Lubrication

To help the various systems of your truck run
smoothly and extend the life time of the many critical
parts that affect performance, there is one thing that
you must do and that is:
LUBRICATE, LUBRICATE AND LUBRICATE!
Insufficient lubrication is a major cause of component
failure on all refuse vehicles. The T
most equipment, has many points that require grease.
See the following sections for detailed lubrication
points on bucket(s), cylinder pins, tailgate hinges and
body-chassis hinges.
Also, refer to the lubrication chart located on the side
of the vehicle for a complete list of lube locations and
the frequency with which they should be greased.

Recommended Lubricants

You will find below the recommended types of
lubricants.

Grease

Any lithium-based commercial multipurpose grease
may be used.

Hydraulic Oil

Minimum requirements for hydraulic oil:
 Any ISO Grade 32 hydraulic oil. This type of
hydraulic oil provides excellent wide temperature
range working condition.
 Viscosity of 32.0 cSt at 104 °F (40 °C).
 Viscosity index: 145 minimum.
 Pour point: -40 °C.
 The oil must contain anti-wear and anti-foam
additives, rust and oxidation neutralizers and self-
protecting agents.
 It must also meet MIL-H-5606 or SAE IOW "MS"
standards.
 Finally, it must be absolutely clean and free of
contaminants.
S ™, like
OP ELECT