Table of Contents
Advertisement
Image 2–9
The status LED (4) will flash orange. The startup screen will display and the status LED will turn to solid
green.
Image 2–11
3.
Turn on your source. The projector detects the source you selected and displays the image.
Note: If you connect multiple sources at the same time, press "Input" key on the control panel or
on the remote control to switch inputs.
If this is the first time you powered up the projector, you will be prompted to select the projector
language, projector orientation and other basic settings.
WARNING: Do not look directly into the lens when the projector is turned on. The strong light might
cause permanent eye damage.
2.3 Start image projection
Connecting and displaying a source
1.
Connect the source cable with the appropriate input port on the Input panel.
The projector will automatically detect the input source.
2.
If multiple sources are connected, press the Input button on the remote control or the projector keypad to
select the desired source (reference 1).
Image 2–12
Image 2–10
1
Image 2–13
Getting started
1
R5913459 /00
G100
21
Advertisement
Table of Contents
