Barco G100 User Manual page 42

Hide thumbs Also See for G100:
Table of Contents

Advertisement

User controls
Advanced color
Configure advanced color settings to improve the color performance.
Color space: Select a color space that has been specifically tuned for the input signal. The available
options are Auto (default),
-
Auto (default)
-
RGB (0 - 255)
-
RGB (16 - 235)
-
REC709
-
REC601
Wall color: Set the wall color of the projector to achieve best color performance for a specific wall. The
available options are:
-
Off (default)
-
Auto Wall Color: Only available with the built-in camera. If selected, the projector automatically adjust
the image color to fit the color of the projection screen. When selected please make sure the camera is
not covered by any objects.
-
Blackboard
-
Light Yellow
-
Light Green
-
Light Blue
-
Pink
-
Gray
Custom RGBCYM: Change the color of a projected image by adjusting each color component in the
image.
-
Auto Test Pattern: Enable the function to view a specific color pattern while adjusting.
-
R / G / B / C / Y / M: Select a color for further adjustment.
Image 5–8
-
Hue: Adjust the hue of the selected color. The value reflect the number of degrees of rotation around
the chromaticity diagram from the original color. Increasing value indicates counterclockwise rotation,
and decreasing value, clockwise rotation.
-
Saturation: Adjust the saturation of the selected color. The value indicates the color shifts from or
towards the white in the center of the chromaticity diagram.
-
Gain: Adjust the gain of the selected color. Increase the value to brighten the image (add white to a
color) or decrease the value to darken the image (add black to a color).
-
Reset: Reset the function settings to factory default values.
Custom White: Adjust the white color performance via setting the Red, Green, and Blue values.
-
Auto Test Pattern: Enable the function to view the white color pattern while adjusting.
-
Red / Green / Blue: Adjust the red, green, and blue colors to optimize the white color performance.
-
Reset: Reset the function settings to factory default values.
42
R5913459 /00
G100

Advertisement

Table of Contents
loading

This manual is also suitable for:

G100-w16G100–w19G100–w22

Table of Contents