Using The Web Control Center - Barco G100 User Manual

Hide thumbs Also See for G100:
Table of Contents

Advertisement

Image 5–9
Crestron
3
: The projector can be controlled with Crestron controller and related software, for example
Room- View®. (Port: 41794)
For more information, please visit http://www.crestron.com.
Extron
4
: The projector can be controlled with Extron devices. (Port: 3023)
For more information, please visit http://www.extron.com.
PJ Link
5
: The projector can be controlled with PJLink v1.0 commands. (Port: 4352)
For more information, please visit http://pjlink.jbmia.or.jp/english.
AMX Device Discovery
For more information, please visit http://www.amx.com.
Telnet: Support using RS232 commands via Telnet connection. (Port: 23)
For more information, see "Using RS232 command by Telnet", page 48.
HTTP: The projector can be controlled with a web page control center. (Port: 80)
For more information, see "Using the web control center", page 47.
For more information about the various types of external devices which can be connected to the
LAN / RJ45 port and remotely control the projector, as well as the supported commands for these
external devices, please contact the Support-Service directly.

5.6 Using the web control center

About web control center
Web control panel allows the user to configure various projector settings using a web browser from any
personal computer or mobile devices.
System requirement
To use the web control panel, make sure your devices and software meet the minimum system requirements.
RJ45 cable (CAT-5e) or wireless dongle
PC, laptop, mobile phone, or tablet installed with a web browser
Compatible web browsers:
-
Internet Explorer 11 or higher version
-
Microsoft Edge 40 or higher version
-
Firefox 57 or higher version
-
Chrome 63 or higher version
3.
Crestron is a registered trademark of Crestron Electronics, Inc. of the United States.
4.
Extron is a registered trademark of Extron Electronics, Inc. of the United States.
5.
PJLink applied for trademark and logo registration in Japan, the United States of America, and other countries by JBMIA
6.
AMX is a registered trademark of AMX LLC of the United States.
6
: The projector can be controlled with AMX devices. (Port: 9131)
User controls
R5913459 /00
G100
47

Advertisement

Table of Contents
loading

This manual is also suitable for:

G100-w16G100–w19G100–w22

Table of Contents