Product Specifications Of The G100-W16 - Barco G100 User Manual

Specifications
A.1 Product specifications of the G100-W16
Specifications
Projector type
Resolution
Brightness
Contrast ratio
Brightness uniformity
Aspect ratio
Lens type
Optical lens shift
Color correction
CLO (constant light output)
Light source
Light source lifetime
Sealed DLP™ core
Orientation
3D
Image processing
Keystone correction
Inputs
Input resolutions
Software tools
Control
Network connection
Power requirements
Power consumption
BTU per hour
Standby power
62 R5913459 /00 G100
Single chip DLP laser phosphor projector
1,920 x 1,200 (WUXGA) - 0.96" DLP chip
19,000 ISO lumen / 17,800 center lumen / 16,000 ANSI lumen
1,100:1 sequential; 5,500:1 dynamic; Extreme black: 100,000:1
90%
16:10
FLDX-lens 0.38:1;
GC-lenses - 0.65-0.75:1 / 0.84-1.02:1 / 1.02-1.36:1 / 1.2-1.5:1 / 1.5-2.0:1 /
2.0-4.0:1 / 4.0-7.2:1 / 7.2-10.8:1
Vertical up to 120%, depending on lens
Horizontal up to 50%, depending on lens
Motorized zoom and focus
Motorized lens shift
Yes
Yes
Laser phosphor
Up to 20,000hrs
Yes
360° rotation, no restrictions
Active and passive stereoscopic 3D
Embedded warp & blend. Also possible via Ptoolset
Yes
2x HDMI 2.0b / DisplayPort 1.2a / DVI-D / HDBaseT / 3G-SDI / VGA (D-
Sub 15 pin)
Up to 1,920 x 1,200 @ 60Hz
refresh rates:
24Hz to 120Hz for 720p (1280x720) / 24Hz to 60Hz for WUXGA
(1920x1200) / 24Hz to 60Hz for 3840x2160 and 24Hz to 30Hz for
4196x2160
Projector Toolset
IR, RS232, RJ45, USB type A
10/100 Ethernet, RJ45
100-240V / 50-60Hz
1150W nominal, 1325W maximum
3,925 BTU/h nominal; 4,520 BTU/h maximum
less than 0.5W