Table of Contents
Advertisement
User controls
-
Vertical: Adjust the top and bottom side of the projected image to make it an even rectangle. It is used
for the images with unequal top and bottom sides.
Image 5–3
•
Pincushion: Pincushion function is used to adjust the image with barrel or pincushion distortion.
-
Horizontal: Correct the projected image with horizontal barrel or pincushion distortion.
Image 5–4
-
Vertical: Correct the projected image with vertical barrel or pincushion distortion.
Image 5–5
•
4–Corner: Reshape the image by moving the 4 corners of the image to have it fit a specific projection
surface.
B
A
H
G
Image 5–6
•
Reset: Reset geometric settings to factory default values.
Advanced warping:
•
Grid point: Use this function to adjust flat and curved surfaces.
•
Warp inner: Enable or disable warp inner control.
2.
Warp inner does not support 2x2 grid points
38
R5913459 /00
G100
C
D
E
F
2
.
Advertisement
Table of Contents
