Barco G100 User Manual page 39

• Warp sharpness: When the grid lines are warped from straight into curve, the grid lines will be distorted
and become jagged. To avoid having jagged lines being too noticeable, users can adjust the warp
sharpness to blur or sharpen the edge of the images.
• Grid color: Select a grid color for warp and blend pattern.
• Grid background: Select the grid background.
• Blend settings: Configure the blend settings directly on the projector to merge two or more adjacent
images into one larger and seamless image.
- Blend width: Set the width of the blend area.
- Overlap grid number: Set the blend overlap grid number.
- Gamma: Set the gamma value of the blend area to adjust the curvature of the blending effect.
1
3
Image 5–7
1–2 Width
3 Blend area
4 Gamma
• Geometry Memory: The projector allows the user to save up to five geometric memories, including the
ones set directly on the projector and the ones configures via Projector Toolset. The available options are
Save Memory, Apply Memory, and Clear Memory.
• Reset: Reset geometric values to the factory default.
Multi-projection
Multi-Projection is a submenu group that consists of the functions for multiple projector applications.
Setting
Possible actions
Projector ID Set the identification code for each projector. For more info, see "Projector Address (ID)", page
25.
Remote code Set the remote code for each remote control to have it matching with the projector.
3D setup Configure the 3D settings for each projector when performing 3D warp and blend. For more
info, see "Image settings", page 40.
Light source Configure the light source settings for the projectors to have their brightness level matching
settings with each other. For more info, see "System Settings", page 49.
Color mode Set the projectors to the same color mode. For more info, see "Image settings", page 40.
White Adjust the white color performance of the projectors to have them looks as the same as
balance possible. For more info, see "Image settings", page 40.
Advanced Adjust the advanced color settings of the projectors to unify the color performance. For more
color info, see "Image settings", page 40.
Lens Set up the lens of each projector to adjust the image focus, size, and position.
2
4
User controls
R5913459 /00 G100 39