Table of Contents
Advertisement
Specification for RS232 by Telnet
•
Telnet: TCP
•
Telnet port: 23 (contact service team for more details)
•
Telnet utility: Windows "TELNET.exe" (console mode).
•
Disconnection for RS232-by-Telnet control normally: Close
•
Below are the limitations for using Windows Telnet utility directly after TELNET connection is ready:
-
There is less than 50 bytes for successive network payload for Telnet-Control application.
-
There is less than 26 bytes for one complete RS232 command for Telnet-Control.
-
Minimum delay for next RS232 command must be more than 200 (ms).
5.8 System Settings
About the system settings menu
Learn how to configure the system settings for the projector. This menu contains the following:
•
Language
•
Date and time
•
On Screen Display
•
Logo setup
•
Schedule
•
Standby mode
•
Power settings
•
Light source settings
•
Shutter
•
Security
•
Backlight
•
High altitude
•
12V trigger
•
User data
•
Reset
•
Service
Language
Select a language for the OSD menu. The available languages are:
•
German (DE)
•
English (EN-US)
•
Spanish (ES)
•
French (FR)
•
Indonesian (ID)
•
Italian (IT)
•
Japanese (JA)
•
Korean (KO)
•
Dutch (NL)
•
Portuguese (PT)
•
Russian (RU)
•
Simplified Chinese (ZH)
Date and time
Set up the date and time for the projector.
•
Clock mode: Set the clock mode to Local or Network. A NTP Servcer is required if the clock mode is set to
network.
•
Date: Set a date for the projector. The date format is in Year/Month/Date.
•
Time: Set the time for the projector.
User controls
R5913459 /00
G100
49
Advertisement
Table of Contents
