Barco G100 User Manual page 41

• Super bright: Best for images with the brightness above the standard level.
• Cinema: Best for videos projected in a dark room.
• HDR: Best for displaying High Dynamic Range (HDR) content.
• sRGB: Standardized image color that matches the sRGB color standard.
• DICOM SIM.: Best for projecting monochrome medical images, such as X-ray diagram.
• Blending: Best for multiple projector installations.
• 3D: Best for playing 3D videos.
• 2D High Speed: This mode is used for displaying 2D input signal with a high framerate (120Hz).
• User: Image settings saved by the user.
Brightness
Adjust the luminous brightness of the projected image to adapt to different ambient light.
Contrast
Adjust the contrast of the projected image. The contrast controls the degree of difference between the lightest
and darkest parts of the image.
Saturation
Adjust the intensity of the image colors.
Tint
Adjust the color balance of red and green in video images.
Sharpness
Adjust the clarity of detail in the projected image.
Gamma
Adjust the gamma levels of the projected image. The smaller the value, the brighter the dark areas of the
image will become. The available options are:
• 1.8
• 2.0
• Standard 2.2
• 2.4
• 2.6
• Graphic
• Video
• CRT (vivid)
• Enhanced (default)
• Film
• DICOM
White balance
Adjust the overall tint of the image to optimize the white color performance.
Setting
Possible actions
Color Adjust the color temperature of the projected image.
temperature
Gain/offset Gain and offset are individual controls for each RGB channels used to set greyscale. The
(RGB) Gains calibrate the color of the dark parts and Bias calibrate the white parts.
• Red / Green / Blue Gain:Adjust the color of the image's bright areas.
• Red / Green / Blue Offset: Adjust the color of the image's dark areas.
White Adjusts the image color brightness while providing more vibrant colors, in increments from 0 to
peaking 10.
Reset Reset the function settings to factory default values.
User controls
R5913459 /00 G100 41