Installation Menu - Barco G100 User Manual

1 Main menu area
2 Submenu area
3 Menu settings area
4

Installation menu

5 Image settings
How to navigate
1. To start up the menu structure, press the Menu key on the remote control or projector keypad.
2. Use arrow keys to navigate through the menus and select the desired settings.
3. Press the Enter key to confirm your selection.
4. Press Exit to return to the previous menu or exit OSD menu if at top level.

5.2 Installation menu

About the installation menu
This menu allows you to configure the settings of the projector to properly project images according to your
specific installation circumstances.
Available submenu's include:
• Lens
• Orientation
• Aspect ratio
• Scale
• Signal
• Edge mask
• Auto-image setup
• Geometric correction (warp)
• Multi-projection
• Test pattern
• Freeze screen
• Reset installation
Lens
Configure the following lens settings to adjust the image quality and position.
Setting
Possible actions
Focus Use the up and down arrow keys to adjust the focus of the image, or you can press Enter to
perform Auto Focus.
Note: The auto adjustment process might take more than one minute to complete.
Zoom Use the up and down arrow keys to adjust the size of the projected image.
Lens shift Use the arrow keys to adjust the lens position to shift the projected area.
Lens memory This projector can save up to five lens settings, which records the lens position, zoom and
focus.
• Save memory: Select a record from 1 to 5 to save the current lens settings.
• Apply memory: Select a record from 1 to 5 to apply the lens settings saved in the selected
record.
• Clear memory: Clear all saved lens records.
Lens Calibrate the lens position to return it to the center of the lens holder.
calibration
Note: To prevent damage to the projector and the lens, always perform lens calibration before
replacing the lens.
Lens lock Lock the lens to prevent the lens motors from moving, which disables all lens functions.
Reset Returns all lens settings to the factory default values.
6 Communication menu
7 System settings
8 Information menu
9 Navigation bar
User controls
R5913459 /00 G100 35