Control Concept (Manual Control); Control Commands (Manual Control); Function Unit Present; Get Version - Leica MST31 User Manual

8

Control Concept (Manual Control)

The manual control unit can receive commands and send back messages. It is connected to
the motorized focusing unit via an internal bus (CAN-Bus).
According to this control concept commands for the manual control unit are sent to the
motorized focusing unit via the RS232.
The motorized focusing unit passes on commands intended for the manual control unit (unit
identifier 71) to the manual control unit via an internal bus.
Commands intended for the motorized focusing unit (unit identifier 70) are executed directly
by the motorized focusing unit itself.
9

Control Commands (Manual Control)

9.1

FUNCTION UNIT PRESENT

Identification of the connected unit
Command code:
Parameter:
Return:
Comment:
The name of the unit is given in plain text (ASCII).
9.2

GET VERSION

Queries the software version
Command code:
Parameter:
Return:
Comment:
Software version in plain text (ASCII), e.g.: "Ver. 1.0"
71 001 <CR>
none
Short designation of the unit
"71 01 LEICA MHS 1"
71 002
none
Version in plain text
17