Save Position 1; Save Position 2; Save Position 3 - Leica MST31 User Manual

Return:
Comment:
If one of the two keys is pressed its state can be retrieved. The information is saved until it has
been retrieved.
The message is continuous if "set enable report key action" has been set.
9.11

SAVE POSITION 1

Saves a position in memory 1 of the manual control unit
Command code:
Parameter:
Return:
9.12

SAVE POSITION 2

Saves a position in memory 2 of the manual control unit
Command code:
Parameter:
Return:
9.13

SAVE POSITION 3

Saves a position in memory 3 of the manual control unit
Command code:
Parameter:
Return:
1 byte
0 No key pressed
1 Resolution 1 selected (fine)
2 Resolution 8 selected (coarse)
3 Move to next stored position
4 Current position saved
5 Position cleared
71 040
up to 10 bytes (long 32 bit)
none
71 041
1 position (long 32 bit)
none
71 042
up to 10 bytes (long 32 bit)
none
20