Report Position 4; Report Position 5; Set Enable Report Key - Leica MST31 User Manual

Return:
Comment:
If no position is saved the value 2147483647 is returned.
9.19

REPORT POSITION 4

Reports position saved in memory 4.
Command code:
Parameter:
Return:
Comment:
If no position is stored the value 2147483647 is returned.
9.20

REPORT POSITION 5

Reports position saved in memory 5.
Command code:
Parameter:
Return:
Comment:
If no position is stored the value 2147483647 is returned.
9.21

SET ENABLE REPORT KEY

Activates/deactivates the message: "Key pressed".
Command code:
Parameter:
Return:
Comment:
The key function is reported continuously with the command "get key state" (71 035).
up to 10 bytes (long 32 bit)
71 048
none
up to 10 bytes (long 32 bit)
71 049
none
up to 10 bytes (long 32 bit)
71 091
1 byte
0 no message required
1 message when key is pressed
none
22