Table of Contents
Advertisement
Floor stand — Assembly
Control unit/lamp housing
To avoid damaging the rotary knobs, never unscrew the
back panel of the control unit/lamp housing when itis in
a lying position.
«>Unscrew the back panel (2) ofthe control unit (Figure 1).
1 Lisa
Figure 1
Push the control unit onto the dovetail guide {1} on the swing-
ing arm.
=> Screw the control unit onto the dovetail guide using four
screws (3) (Figure 2}.
Figure 2
Screw the back panel of the control unit back on.
Plug the fiber-optic light guide (4), CAN-bus cable (5) and
power supply cable (6} into the control unit/lamp housing
{Figure 3).
Figure 3
=>In order to keep the power cable (6) plugged into the control
unit, the cable has to be fixed with cable tie and cable tie
holder {7} {Figure 4}.
Figure 4
Leica M501 / Ref. 10 711 784 / Version B
9
Advertisement
Table of Contents
