9.14
SAVE POSITION 4
Saves a position in memory 4 of the manual control unit
Command code:
Parameter:
Return:
9.15
SAVE POSITION 5
Saves a position in memory 5 of the manual control unit
Command code:
Parameter:
Return:
9.16
REPORT POSITION 1
Reports position saved in memory 1.
Command code:
Parameter:
Return:
Comment:
If no position is saved the value 2147483647 is returned.
9.17
REPORT POSITION 2
Reports position saved in memory 2.
Command code:
Parameter:
Return:
Comment:
If no position is saved the value 2147483647 is returned.
9.18
REPORT POSITION 3
Reports position saved in memory 3.
Command code:
Parameter:
71 043
up to 10 byte (long 32 bit)
none
71 044
up to 10 bytes (long 32 bit)
none
71 045
none
up to 10 bytes (long - 32 bit)
71 046
none
up to 10 bytes (long 32 bit)
71 047
none
21