Assembly - Leica MST31 User Manual

Assembly

Incident- or transmitted-light stand
Column with motor-focus mechanism
Using three Allen screws, secure the column to the
incident- or transmitted-light base (refer to user manual
for stereomicroscope or macroscope).
Using the clamping screw, secure the lower stop to the
column, taking the position of the object into account
(see page 9).
Large swinging-arm stand
Fit the inclinable carrier rod to the horizontal arm in
accordance with the user manual for the stereomicroscope
or macroscope.
Using the clamping screw, secure the lower stop to the
carrier rod (see page 9).
Microscope carrier column with motor-focus mechanism
Using an Allen screw, secure the microscope
carrier to the column of the stand (refer to user manual for
stereomicroscope or macroscope).
Fit the optics carrier, binocular tube and accessories
to the stereomicroscope or macroscope in accordance
with the user manual.
Transformer
Respect the directions for safety on pages 4 and 5.
Technical data
Type MST31
Input voltage
Input frequency
Input current
Operating voltage
Operating temperature
Storage temperature
Maximum mechanical loading 12 kg
8
base of stand
85 to 264 VAC
47 to 440 Hz
max. 0.80 A at 115 VAC
max. 0.50 A at 230 VAC
30V
+10°C to +40°C
–20°C to +55°C
Connecting the motor focus
1 Connector for transformer
2 Connector for footswitch or for PC interface kit
3 Connector for manual control
Connect the transformer to the motor-focus mechanism.
Connect the power cable to the electricity supply.
Connect the manual control and/or footswitch.
If appropriate, connect the PC interface kit instead
of the footswitch.
1
2
3