Acceleration/Deceleration; Setting Acceleration/Deceleration Patterns And Switching Acceleration/Deceleration Patterns 1, 2, 3 And - Toshiba TOSVERT VF-AS1 Instruction Manual

6.30

Acceleration/deceleration 2

6.30.1 Setting acceleration/deceleration patterns and switching
acceleration/deceleration patterns 1, 2, 3 and 4
 : Acceleration time 2
 : Deceleration time 2
 : Acceleration/deceleration 1 pattern
 : Acceleration/deceleration 2 pattern
 : Acceleration/deceleration time 1, 2, 3, 4 selection
f50 : Acceleration/deceleration switching frequency 1
f506 : Acceleration S-pattern lower limit adjustment
f507 : Acceleration S-pattern upper limit adjustment
f508 : Deceleration S-pattern lower limit adjustment
• Function
Four acceleration times and four deceleration times can be specified individually. The selection/switching
mode can be selected from the following 3 options:
1) Selection by means of parameters
2) Switching by means of frequencies
3) Switching by means of terminals
[Parameter setting]
6
Title







Note:The minimum setting of acceleration and deceleration times have been set respectively at 0.1 sec. by default,
but they can be changed within a range of 0.01 sec. (setting range:0.01~600.0 sec.) by changing the setting of
the parameter  (default setting).
⇒ For details, refer to Section 5.20.
1) Selection using parameters
Output frequency [Hz]
 = 
 = 
 = 
 = 
Acceleration/deceleration time 1 is initially set as the default. Acceleration/deceleration time ,  and  can be
selected by changing the setting of the .
Enabled if = (operation panel input enabled).
Function
Acceleration time 2
Deceleration time 2
Acceleration/deceleration 1, 2, 3,
4 selection
Acceleration time 3
Deceleration time 3
Acceleration time 4
Deceleration time 4

0




 : Deceleration S-pattern upper limit adjustment
 : Acceleration time 3
 : Deceleration time 3
 : Acceleration/deceleration 3 pattern
 : Acceleration/deceleration switching frequency 2
 : Acceleration time 4
 : Deceleration time 4
 : Acceleration/deceleration 4 pattern
 : Acceleration/deceleration switching frequency 3
Adjustment range
[Note]~ sec.
[Note]~ sec.
:Acceleration/deceleration 1,
: Acceleration/deceleration 2,
: Acceleration/deceleration 3,
: Acceleration/deceleration 4
[Note]~ sec.
[Note]~ sec.
[Note]~ sec.
[Note]~ sec.




F-48
E6581301
Default setting
According to model
According to model

According to model
According to model
According to model
According to model
Time [s]
Time [s]
Time [s]
Time [s]