Hydraulic Fittings; Updates - Raven AutoBoom XRT Installation Manual

• variable damper installation instructions in "Damper Installation" on page 14.
• REM node installation instructions in "Mount the AutoBoom XRT Valve" on page 16.
• ABM node installation instructions in "Autoboom ABM Node Installation" on page 31.
• tilt sensor installation instructions in "Mount the Boom Sensors" on page 19.
• outer sensor installation information in "Mount the Boom Sensors" on page 19.
• inner sensor installation information in "Mount the Boom Sensors" on page 19.
• center sensor installation instructions in "Mount the Center Sensor" on page 21.

HYDRAULIC FITTINGS

This manual may reference the following types of hydraulic fittings:
• SAE O-ring fittings
• ORFS (O-Ring Face Seal) fittings
• JIC fittings
SAE O-Ring Fittings

UPDATES

Software and manual updates are available on the Raven Applied Technology website:
At Raven Industries, we strive to make your experience with our products as rewarding as
possible. One way to improve this experience is to provide us with feedback on this manual.
Your feedback will help shape the future of our product documentation and the overall service we
provide. We appreciate the opportunity to see ourselves as our customers see us and are eager
to gather ideas on how we have been helping or how we can do better.
To serve you best, please send an email with the following information to
-AGCO RoGator C AutoBoom® XRT Installation Manual
-P/N 016-0237-001 Rev. A
-Any comments or feedback (include chapter or page numbers if applicable).
-Let us know how long have you been using this or other Raven products.
We will not share your email or any information you provide with anyone else. Your feedback is
valued and extremely important to us.
Thank you for your time.
P/N 016-0237-001 Rev. A
ORFS Fittings
https://ravenprecision.com
techwriting@ravenind.com
INTRODUCTION
JIC Fitting
7