To Provision 500/2500 Phonesets - Nortel Meridian 1000 Configuration Manual

January 2007
Prompt Response
CLS WTA, UNR,
FNA, FBA,
HTA, MWA
KEY 0 SCR xxxx Single call ringing DN, where xxxx is the user's DN.
CPND New
NAME First,Last
KEY 3 MSB
KEY 4 TRN
KEY 5 AO3
KEY 6 CFW nn
xxxx
KEY 8 MWK
yyyy
<Enter>
REQ

To provision 500/2500 phonesets

1 Load overlay 10.
2 For each prompt listed below, enter the response indicated in overlay 10. For
those prompts that are not listed, you can accept the default by pressing Enter.
Prompt Response
REQ
TYPE 500
TN c u
CUST xx
DN yyyy
Communication Server 1000 Meridian and CallPilot Server Configuration
Description
Call forward no answer allowed. Call forward busy
allowed. Hunt allowed. Message waiting allowed.
Calling Party Name Display (if adding a new set).
The name of the phoneset user.
Make set busy
Transfer
Three-party conference. Required by the Call Sender
feature.
Call forward all calls, where nn is the maximum number
of digits in the Call Forward DN, and xxxx is the Voice
Messaging or Multimedia Messaging CDN.
Add a message waiting key/lamp, where yyyy is the
Voice Messaging or Multimedia Messaging CDN.
Press Enter until you reach the end of the overlay (the
REQ prompt).
If you are finished adding phonesets, enter **** to exit.
To add another phoneset, return to the top of the table.
Description
NEW
500 phoneset
Terminal number of the phone, where c is the card, and u
is the unit.
Customer number (0–99)
Directory number
Configuring the CS 1000 system
93