Nortel Meridian 1000 Configuration Manual page 104

Configuring the CallPilot server software
choosing the list of pre-configured servers or locations in the Preset
server list box
choosing the Last Server Accessed item
entering the address manually
Type the CallPilot server host name or IP address in the Server box.
Note: If you are logging on to the CallPilot server from a PC, type the actual
CallPilot server name or IP address in the Server box. If you type local host
instead of the CallPilot server name or IP address, you cannot establish an
Application Builder connection to the CallPilot server from CallPilot Manager or
make calls to the phoneset to play or record greetings.
If the CallPilot server that you are connecting to has Network Message
Service (NMS) installed, type the CallPilot server host name or IP address in
the Server box, and then type the name of the switch location on which the
administration mailbox resides in the Location box.
4 Click Login.
Result: The main CallPilot Manager page appears.
Figure 23: CallPilot Manager main screen
Note: Logging on for the first time forces you to change the password using
numeric characters. (This is not a strong password, as described in the CallPilot
Fundamentals Guide.)
5 Continue with "Running the Configuration Wizard" on page 105.
104
Standard 1.16
CallPilot