Nortel Meridian 1000 Configuration Manual page 16

CallPilot and CS 1000 connectivity overview
Step Description
7 Test the connection to the ELAN subnet, if applicable.
8 Test the connection to the Nortel Server Subnet
(NS Subnet).
9 Verify that CallPilot answers when you dial the Voice Messaging
DN.
Stage 4: Test the CallPilot services and channels.
Note: For instructions, see "Testing the CallPilot installation" on
page 123.
10 Check the system-ready indicators.
11 Verify network connectivity to the CallPilot server over the ELAN
subnet and NNS Subnet.
12 Verify that CallPilot can receive calls.
13 Verify that you can leave a message.
14 Verify that you can retrieve a message.
15 Verify that each call channel and multimedia channel is functioning
correctly.
16 Check for CallPilot alarms using the Alarm Monitor in CallPilot
Manager. Upon confirmation that CallPilot is operating correctly,
clear all alarms.
Stage 5: Install CallPilot Manager on a stand-alone web server (optional).
17 Perform this step only if you want to set up a separate web server
for CallPilot administration. This is necessary if you want to use the
Reporter application, or if high administration traffic is expected.
For instructions, refer to the CallPilot Software Administration
Guide.
16
Standard 1.16
Check
❒
❒
❒
❒
❒
❒
❒
❒
❒
❒
❒
CallPilot