Booth Control Keys And Indicators - Graco ProMix PD2K Electronic Operation

Booth Control Keys and Indicators

Key/Indicator
Alarm Reset Key and
Indicator
Standby Mode Key
and Indicator
Mix Mode Key and
Indicator
Job Complete Key
Pressure Control Key
and Indicator
Purge Mode Key and
Indicator
Up Key
Down Key
Enter Key
332562B
Definition and Function
• Red LED is solid when an alarm condition is present.
• Red LED blinks when an event requiring user acknowledgement occurs at
any level.
• Press key to acknowledge. LED shuts off after alarm is cleared.
• Starts Standby mode.
• Green LED remains lit while in Standby mode.
• Green LED blinks when the system is on and is not mixing or purging. In Idle
mode, the Standby LED and the Mix LED both blink.
• Green LED blinks during pump maintenance checks.
• Press and hold the key to startup or shutdown the pumps.
• Starts Mix mode.
• Green LED remains lit while in Mix mode.
• Green LED blinks during a mix fill. If there is no fluid flow for 30 sec after
starting mix fill, the process must be restarted.
• In Idle mode, the Mix LED and the Standby LED both blink.
• Signals that job is complete, and resets A, B, and solvent totalizers.
• Press to display the current job number on the booth control. Press a second
time to log the current job and increment to the next job number. Times out
after 5 seconds of inactivity.
• Starts Pressure Change mode.
• Green LED blinks while in Pressure Change mode.
• To change the pressure, press the Pressure Control key and use the Up/Down
keys to select the desired pressure. Pressure Change mode times out after 5
seconds of inactivity. Stored recipe is only updated at the end of a spray mode.
• Starts Purge mode.
• Green LED remains lit while in Purge mode.
• Green LED blinks when gun needs to be purged and is waiting for purge to
begin.
• Scrolls recipe numbers up.
• Scrolls pressure value up in Pressure Change mode.
• Scrolls recipe numbers down.
• Scrolls pressure value down in Pressure Change mode.
• Enters selected recipe and starts color change sequence.
• Accepts pressure value change.
Booth Control
23