Maintenance Screen 4 - Graco ProMix PD2K Electronic Operation

Proportioner

Hide thumbs Also See for ProMix PD2K Electronic:

Table of Contents

Setup Mode Screens

Maintenance Screen 4

Maintenance screen 4 displays cycle counts for a

selected color, catalyst, or solvent valve.

Press and hold the Reset button

seconds to reset the counter.

If the system is in Standby, valves can be opened

or closed by selecting or deselecting the box for the

corresponding valve.

NOTE: Gun valves are available only if Mix at Wall is

enabled on

System Screen 3, page

Figure 59 Maintenance Screen 4, Color Valve Resets

for 1-2

42.

Figure 60 Maintenance Screen 4, Solvent Valve

Resets

NOTE: When Solvent is selected in the Material

ﬁeld, the number to the right of "Solvent" is the pump

number, not the material number.

332562B

Table of Contents