Run Mode Screens
NOTE: Selection fields and buttons that are
grayed-out on the screens are not currently active.
Splash Screen
At power up, the Graco logo will display for
approximately 5 seconds, followed by the Home
screen.
Home Screen
The Home screen displays the current status of the
system. The following table details the information
shown.
Figure 16 Home Screen, in Mix Mode with
Diagnostics On
332562B
Figure 15 Splash Screen
To view pump flow rates and pressures
(as shown), select "Diagnostic Mode" on
System Screen 1, page
Run Mode Screens
39.
31