Table of Contents
Advertisement
PrecisionSwirl Module Operation
Reading the PrecisionSwirl Control Assembly Controls and
Indicators
Table 1 describes the controls on the PrecisionSwirl control assembly. See F
and indicators.
Table 1. Control Assembly Controls
Button/Switch
MAIN ON/OFF Switch
Control Select Switch
AUTOMATIC / MANUAL
RUN / ENABLE Button
STOP Button
MANUAL SPEED CONTROL Knob
(potentiometer)
Table 2 describes the indicators on the PrecisionSwirl control assembly. See F
and indicators.
Table 2. Control Assembly Indicators
Button/Switch
POWER (white
RUN (green)
MOTOR FAULT (red)
310554V
What it does
Controls power to the system.
•
In the MAIN ON (I) position, system power is turned on.
•
n the OFF (0) position, system power is turned off.
Switches the orbital dispenser to automatic or manual control.
•
In the AUTOMATIC position, the orbital dispenser is controlled from a
remote source, such as a robot, via an interface cable.
•
In the MANUAL position, the orbital dispenser is controlled directly from
the control assembly front panel.
Pushing the RUN/ENABLE (black) button starts the orbital dispenser motor
in manual mode or enables the motor to be started in automatic mode.
Pushing the STOP (red) button removes power from the orbital dispenser.
Regulates the motor speed of the orbital dispenser in the manual control
mode.
•
Rotating the control knob clockwise increases motor speed.
•
Rotating the control knob counter–clockwise decreases motor speed.
Indicator
Light is
Meaning
ON
Power is on.
OFF
Power is off.
ON
PrecisionSwirl orbital dispenser is ready for operation, or is
operating in manual control mode.
OFF
PrecisionSwirl orbital dispenser is not ready for operation, or
is not operating in manual control mode.
ON
Motor is not rotating. Or, the motor is rotating below the mini-
mum speed.
OFF
Motor is functioning properly.
PrecisionSwirl Module Operation
. 12 for an illustration of the controls
IG
. 12 for an illustration of the controls
IG
21
Advertisement
Table of Contents
