Recipe Screen - Graco ProMix PD2K Electronic Operation

Recipe Screen

Figure 40 Valid Recipe Screen
Recipe
Enter the desired recipe number (1-60).
Recipe 0
Use Recipe 0 to flush the system.
• If a recipe (1–60) is loaded: Select Recipe 0 to flush
the previously active pumps and purge the gun.
• If Recipe 0 or 61 is loaded: Select Recipe 0 to
flush all pumps and purge the gun.
Enabled
Selecting "Enabled" makes the selected recipe
accessible from the booth control, in addition to the
ADM. The booth operator can then quickly select a
desired recipe, without scrolling through all 60.
Color (A) Valve
Enter the desired color valve number (1-30).
NOTE: If you enter a number which is not valid in
your system configuration, the field will be highlighted
and the recipe becomes invalid. For example, if your
configuration has 8 color valves and you enter 30,
the field will appear as shown below.
332562B
Figure 41 Invalid Recipe Screen
Catalyst (B) Valve
Enter the desired catalyst valve number (1-4).
NOTE: If you enter a number which is not valid in
your system configuration, the field will be highlighted
and the recipe is invalid. For example, if your
configuration has 1 catalyst valve and you enter 4,
the field will be highlighted and the recipe is invalid.
Flush Sequence
Enter the desired flush sequence (1-5). For hard
to flush colors, select a longer sequence. 1 is the
default, and should be designated for the longest,
most thorough flush duration.
If Mix at Wall is enabled on System Screen 3, enter
the desired flush sequence (105) for the color (A)
valve and the catalyst (B) valve. The gun purge time
for each material depends on the flush sequence
assigned to each. See
materials A and B require different purge times,
assign separate flush sequences. Set the necessary
gun purge time for each. For hard to flush colors,
select a longer sequence. Flush sequence 1 is the
default, and should be designated for the longest,
most thorough flush duration.
Mix Ratio
Enter the desired mix ratio (0 to 50.0):1.
Potlife Time
Enter the potlife time (0 to 999 minutes). Entering
0 disables this function.
Setup Mode Screens
Flush Screen, page 47. If
45