Guns - Graco ProMix PD2K Electronic Operation

Information for Systems with Multiple Guns
The Multiple guns feature enables the ability to
simultaneously track up to 60 different mixed material
recipes, each loaded into a dedicated gun. This
feature is enabled on System Screen 3, page
Recipe Screen
Because the system has a dedicated gun for each
recipe, the associated hose length and diameters
could be unique. Therefore, these parameters are
disabled on System Screen 3, page
appear on the Recipe Screen, page
hose length and diameter for a gun that will spray
a particular recipe.
Figure 36
Potlife Screen
In Run mode, the Potlife Screen appears in the menu
bar between Fill and Usage. This screen displays
how much time remains in the potlife of any given
recipe (gun). Recipes are highlighted and show
remaining potlife time only if that gun is filled with
mixed material and has a non-zero potlife.
Figure 37
332562B
Changing Recipes or Purging
When Multiple Guns is enabled, the Spray Screen
allows the user either to change the active recipe
42. (the recipe that is loaded in the pumps) or to purge
a particular gun (recipe). Select either Recipe or
Purge from the dropdown menu and enter the recipe
number. Use the Purge soft key to purge the active
recipe.
42, and now These actions also can be done using the Booth
45. Enter the Control. Use the normal procedure to change
the active recipe or to purge the active gun. See
Booth Control, page
active currently, scroll Up
the desired recipe. Then press Purge
Purge is not pressed within 5 seconds, the system
will revert to the active recipe number.
Figure 38
Setup Mode Screens
22. To purge a gun that is not
or Down to
. If
43