Graco ProMix PD2K Electronic Operation page 72

System Errors
Calibration Errors
NOTE: In some error codes listed below, a # symbol is shown as the last digit. This symbol represents the
applicable component number, which can vary. The unit's display will show the applicable number as the last
digit in the code. For example, the ENT# code listed in this table will be displayed as ENT1 if the affected
component is pump 1, ENT2 for pump 2, and so on.
Code Type
END# Record
ENS0 Record
Record
ENT#
72
Name
Calibration Pump #
Calibration Solvent Meter
Calibration Stall Test Pump
#
Description
A calibration test was run on the pump.
A calibration test was run on the solvent
meter.
A stall test was completed successfully
on pump #.
332562B