Table of Contents
Advertisement
1. Open the device as described in the subsection 5.1 "Opening and Closing the Chassis" (step 1 and 8 - 12).
2. Locate the M.2 Key E socket (M2E1) (Figure 5, pos. 2) and the corresponding fixing bolt (Figure 5, pos. 5 for Type
2230 / 3030 card).
3. Align the notch on the M.2 expansion card with the notch in the M.2 socket. Insert the M.2 expansion card into the
corresponding socket and rotate it down with the fixing hole of the M.2 expansion card over the corresponding
fixing bolt.
4. Press the M.2 expansion card down on the side with the fixing hole and secure it with the available fastening
screw.
5. In order to close the device, proceed step 13 - 14 described in the subsection 5.1 "Opening and Closing the Chassis".
In case of installing both an M.2 Key E Type 2230 / 3030 expansion card and an M.2 Key
B Type 2242 / 3042 expansion card / SSD, install the M.2 Key E Type 2230 / 3030
expansion card first, then the fixing bolt extension, and finally the M.2 Key B Type 2242 /
3042 expansion card / SSD.
5.1.5. Installing A Micro SIM Card
To install a Micro SIM card please proceed according to the steps described:
1. Open the device as described in the subsection 5.1 "Opening and Closing the Chassis" (step 1 and 8 - 12).
2. Locate the Micro SIM card socket (CN9) (Figure 5, pos. 3).
3. To unlock the Micro SIM card socket slide the cover of the Micro SIM socket in the direction shown in Figure 10.
4. Lift gently the slot cover and open the slot cover as shown in Figure 10.
5. Slide the Micro SIM card into the left and right card guides of the socket cover and push down the cover in order to
close the cover as shown in Figure 10.
6. After closing the cover, lock the cover by sliding the closed cover in the direction shown in Figure 10.
Figure 10: Installing the Micro SIM card
7. In order to close the device, proceed step 13 - 14 described in the subsection 5.1 "Opening and Closing the Chassis".
www.kontron.com
KBox F-420-WLU - User Guide, Rev. 1.0
// 33
Advertisement
Table of Contents
