Table of Contents
Advertisement
7.1.2. VESA Mounting (2) -- - Compatible with Intel® NUC
Depending on the ordered KBox F-420-WLU configuration, your system may be supplied with a VESA mounting kit
which compatible with Intel® NUC mini PC (Figure 16). The kit consists of a VESA mounting bracket (Figure 16, pos. 1) to
be fixed permanently on the mounting surface, four M4x8 screws (Figure 16, pos. 2) to secure the VESA mounting
bracket on the mounting surface, and two M3 hanger screws (Figure 16, pos. 3) to be attached to the bottom side of
the KBox F-420-WLU for hanging the system on the VESA mounting bracket.
Figure 16: Optional VESA mounting kit compatible with Intel® NUC
3
2
1 VESA Mounting Bracket
2 M4x8 Screw
3 M3 Hanger Screw
The mounting bracket complies with VESA 75 and VESA 100 patterns (Figure 17). To fasten the bracket, the control
cabinet / custom enclosure / machine / monitor / wall must have VESA 75 or VESA 100 screw pattern shown as
Figure 17 for mounting.
Figure 17: Hole pattern of the mounting bracket
www.kontron.com
KBox F-420-WLU - User Guide, Rev. 1.0
1
unit: mm
// 40
Advertisement
Table of Contents
