Figure 27: Bios Advanced Menu - Display Configuration - Kontron KBox F-420-WLU User Manual

Figure 27: BIOS Advanced Menu - Display Configuration

Main
Display Configuration
Primary Display
Internal Graphics*
Aperture Size
DVMT Pre-Allocated
DVMT Total Gfx Mem
Primary IGFX Boot Display
Secondary IGFX Boot Display**
* This item is activated only when selecting PEG for Primary Display.
** This item appears only when selecting EFP, LFP, EFP3, EFP2 or EFP4 for Primary IGFX Boot Display.
Feature
Primary Display
Internal Graphics
Aperture Size
DVMT Pre-Allocated
DVMT Total Gfx Mem
Primary IGFX Boot
Display
Secondary IGFX Boot
Display
www.kontron.com
BIOS SETUP UTILITY
Advanced Power
[IGFX]
[Enabled]
[256MB]
[32M]
[256M]
[VBIOS Default]
[Disabled]
Version 2.20.1275. Copyright (C) 2020, American Megatrends, Inc.
Option
[IGFX], [PEG]
[Disabled], [Enabled]
[128MB], [256MB],
[512MB], [1024MB],
[2048MB]
[32M], [64M], [4M],
[8M], [12M], [16M],
[20M], [24M], [28M],
[32M/F7], [36M],
[40M], [44M], [48M],
[52M], [56M], [60M]
[128M], [256M], [MAX]
[VBIOS Default], [EFP],
[LFP], [EFP3], [EFP2],
[EFP4]
[Disabled], [EFP],
[EFP3], [EFP2], [EFP4]
Boot
Description
Select which of IGFX / PEG Graphics device should be Primary
Display.
Keep IGFX enabled based on the setup options.
Select the Aperture Size.
Note: Above 4GB MMIO BIOS assignment is automatically
enabled when selecting 2048MB aperture. To use this feature,
please disable CSM Support.
Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size
used by Internal Graphics Device.
Select DVMT 5.0 Total Graphic Memory size used by the Internal
Graphics Device.
Select the Video Device which will be activated during POST.
This has no effect if external graphics present.
Secondary boot display selection will appear based on your
selection.
VGA modes will be supported only on primary display.
Select Secondary Display Device.
KBox F-420-WLU - User Guide, Rev. 1.0
Security Save & Exit
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
// 63