Figure 29: Bios Advanced Menu - - Super Io Configuration - - Serial Port 1 Configuration - Kontron KBox F-420-WLU User Manual

Figure 29: BIOS Advanced Menu -- - Super IO Configuration -- - Serial Port 1 Configuration
Main
Super Port 1 Configuration
Serial Port
Device Settings
Change Settings
Serial Port 1 Type
RS485 Deplux Mode*
RS485 Auto Flow Control**
RS485/422 Receiver Termination***
* This item appears only when selecting RS485 for the Serial Port 1 Type.
** This item appears only when selection RS458 for Serial Port 1 Type & selecting Half Duplex for RS485 Duplex Mode.
*** This item appears only when selecting RS422 or RS485 for Seral Port 1 Type.
Feature
Serial Port
Change Settings
Serial Port 1 Type
RS485 Duplex Mode
RS485 Auto Flow
Control
RS485/422 Receiver
Termination
www.kontron.com
BIOS SETUP UTILITY
Advanced Power
[Enabled]
IO=3F8h; IRQ=4;
[Auto]
[RS232]
[Half Duplex]
[Disabled]
[Enabled]
Version 2.20.1275. Copyright (C) 2020, American Megatrends, Inc.
Option
[Disabled], [Enabled]
[Auto], [IO=3F8h;
IRQ=4;], [IO=3F8h;
IRQ=3, 4, 5, 6, 7, 9, 10,
11, 12;], [IO=2F8h;
IRQ=3, 4, 5, 6, 7, 9, 10,
11, 12;], [IO=3E8h;
IRQ=3, 4, 5, 6, 7, 9, 10,
11, 12;], [IO=2E8h;
IRQ=3, 4, 5, 6, 7, 9, 10,
11, 12;]
[RS232], [RS422],
[RS485]
[Half Duplex], [Full
Duplex]
[Disabled], [Enabled]
[Disabled], [Enabled]
Boot
Description
Enable or disable Serial Port (COM).
Select an optimal setting for Super IO device.
Serial Port 1 Type.
RS485 Duplex Mode.
Enable or disable RS485 Auto Flow Control.
Enable or disable RS485/422 Receiver Termination.
KBox F-420-WLU - User Guide, Rev. 1.0
Security Save & Exit
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
// 65