Table of Contents
Advertisement
Figure 12: Hole pattern of the mounting bracket
To mount the KBox F-420-WLU please proceed according to the steps described:
1. Prepare the mounting surface with four screws (Figure 11, pos. 2) and if necessary anchors corresponding to the
mounting surface type if no VESA-compliant screw holes are available.
2. Secure the VESA mounting bracket to the mounting surface with screws (Figure 13).
Figure 13: Securing the VESA mounting bracket
3. Align the fixing slots (Figure 14, pos. 1) on the KBox F-420-WLU with the fixing hooks (Figure 11, pos. 3) on the
mounting bracket. Engage them together (Figure 15). Push down the spring cushion (Figure 11, pos. 4) on the
mounting bracket until the KBox F-420-WLU can be completely placed on the spring cushion (Figure 15). Release
the spring cushion and the KBox F-420-WLU will be solidly secured to the mounting bracket.
Figure 14: Fixing slot of the KBox F-420-WLU
1 Fixing Slot
www.kontron.com
1
KBox F-420-WLU - User Guide, Rev. 1.0
1
// 38
Advertisement
Table of Contents
