Faults And Troubleshooting - CARDIOSTRONG TX90 Assembly And Operating Instructions Manual

2.2

Faults and troubleshooting

The equipment runs through regular quality controls during production. Nevertheless, errors
or malfunctions on the equipment may occur. Individual parts are often the cause of faults and
replacement is usually sufficient. Please use the following overview to see the six most common
errors and how to repair them. If the equipment still does not work properly, please contact your
contract partner.
Error
Console does not
react
Running belt tilted
Running belt slips
through/stops
Scraping noises
Display does not show
anything
No pulse display
10
Cause
Safety key missing
Running belt not aligned
Belt tension/lubrication not
ok
Running belt scrapes,
because it is not aligned
Check plug connections
(cables)
Sources of interference in
the room
With chest strap
Unsuitable chest strap
Position of the chest strap
incorrect
Batteries empty
Repair
Check if the safety key is inserted and
place it in
Align running belt in accordance with
the instructions
Check belt tension/lubrication in
accordance with the instructions
Align running belt in accordance with
the instructions
Mains switch on "on", make sure that the
safety key is inserted
Remove sources of interference (e. g.
mobile phone, speakers, WLAN, mover-
and cleaning robot, etc.)
Use suitable chest strap (see
recommended accessories)
Reposition chest strap and/or moisten
electrodes
Change batteries
TX90