Error Codes And Troubleshooting - CARDIOSTRONG TX30 Assembly And Operating Instructions Manual

5.3

Error Codes and Troubleshooting

The electronics of the equipment continuously carries out tests. In case of deviations, an error code
appears on the display and normal operation is stopped for your safety.
+ E1 error code after 3-8 seconds of use
This error code will most likely be caused by an insufficient cable connection or by an issue with the
speed sensor. Check all cable connections made during installation.
+ E1 error code after several minutes of use
This problem usually arises from too much friction between the running mat and the deck. It is
recommended to turn off the treadmill, lubricate it and turn the treadmill on again.
+ E6 error code
Turn off the device for 30 seconds and turn it on again. Check whether the incline function works.
If the problem still occurs, check all cable connections made during installation and turn the device
on again.
In case the problem can not be fixed, please contact Sport-Tiedje for technical support.
35