About This Document; Safety Notes; Important Safety Information - Ametek 5000 Manual

About This Document

This document primarily describes the essential health and safety requirements for the compo-
nents that make up the Model 5000 Moisture Analyzer intended for use in explosive atmosphere
locations. These sections are described below.
The procedures and information discussed in this document include only abbreviated steps
to install, operate, and perform maintenance on the Model 5000 Moisture Analyzer. They do,
however, include all relevant safety warnings and cautions to ensure the safety of personnel and
the analyzer in explosive atmosphere locations. [For complete and detailed descriptions of the
procedures discussed in this guide, refer to the analyzer User Manual.]

Safety Notes

WARNINGS, CAUTIONS, and NOTES contained in this manual emphasize critical instructions
as follows:
!
An operating procedure which, if not strictly observed, may result in personal injury or envi-
ronmental contamination.
WARNING
!
An operating procedure which, if not strictly observed, may result in damage to the equipment.
CAUTION

Important information that should not be overlooked.
NOTE

Important Safety Information

Before working on the analyzer, read and understand the following Notes, Warnings, and
Cautions, which contain important safety and general information that applies to all aspects of
working on the analyzer.
Additional Notes, Warnings, and Cautions are included in individual procedures in this docu-
ment (and in the analyzer User Manual) to indicate special conditions to consider during instal-
lation, before opening its covers or doors, and while working on the analyzer.
Essential Health & Safety Requirements | 5