Table of Contents
Advertisement
Enclosure dimensions
The Ember must be positioned within the enclosure on a flat level surface that allows free
movement of the appliance. The enclosure must be capable of supporting 1.5 times the weight of
the Ember.
Masonry
Actual chimney size needs to be at least 200 x 200 mm
for the two flexi flues to fit down the chimney.
600
W-width
600 mm
Infill panel*
600-750 mm
Masonry frame*
N/A
H-height
600 mm
Infill panel*
600-675 mm
Masonry frame*
N/A
D-depth
400 mm min.
* Enclosure dimensions can be larger if using an infill
panel or a masonry frame.
Corner installations
Ember 600
Mock chimney
700
700 mm
W-width
700-850 mm
H-height
700-785 mm
D-depth
600 mm
600-675 mm
Framing dimensions above are before the zero clearance
600-638 mm
frame is fitted.
400 mm min.
For mock chimney installations the Ember MUST BE
installed with the Ember Zero Clearance frame, which
gives the required clearances to combustibles.
Please note
If installing the Rinnai Ember into a purpose built chimney
breast or chase, which is not open to the roof space of the
building, you will need to add cavity vents. Refer p. 32-33
for more information
Ember 700
600
700
700 mm
800 mm
700 mm
700 mm
400 mm min.
400 mm min.
Ember Installation Guide: 12890-F 06-21 | 9
Advertisement
Table of Contents
