Stone set installation
The stone set is packaged separately. Use extreme care when handling the stones, they are made
from fragile material and will damage easily. While the stone sets for the Ember 600 and 700 are
different (Ember 600 has six less stones), the installation steps are the same. Refer to p. 20 for the
correct installation order.
Please note: The rockwool, for illustration purposes, is lighter in colour in these images. The actual
colour is black.
Ember 600
Ember 700
Before adding the stone set make sure the vermiculite and glass packets have been added into the
burn media tray (refer p.21), and that it has been secured back in place. Also remove the two back
log locating pins and bracket (not needed for the stone set)—replace the black screws holding the
bracket back into the burner.
Back log location pin and bracket
24 | Ember Installation Guide: 12890-F 06-21
2
3
2
3
1
1