Microsoft Windows 95/98; Printing Environment Setting; And Test Printing - Canon LBP-800 Service Manual

D. Printing Environment Setting and Test Printing
1. Microsoft Windows NT4.0
a. Printing Environment Setting
A list of printing environment that can be set from the CAPT dialog box is shown below.
Note: The values in bold are the default values at the time of shipment from the factory.
• Document Defaults
Page Setup tab
Setup item
Paper Size* Letter / Legal / A4 / Executive / Envelope DL / Envelope #10 /
Envelope C5 / Envelope Monarch / B5 / Index Card / Custom
Output Size
/ Envelope #10 / Envelope C5 / Envelope Monarch / B5 / Index Card / Custom
Copies
Orientation
Page Layout
Manual Scaling
Page Order 2 Pages per Sheet/Portrait
2 Pages per Sheet/Landscape
4, 8, 9 Pages per Sheet
* Default value is Letter size for USA and A4 size for other countries.
Quality tab
Setup item
Resolution
Halftorning
Brightness
Contrast
Setup Value
Match Page Size / Letter / Legal / A4 / Executive / Envelope DL
1 X 999
Portrait / Landscape
1 Page per Sheet / 2 Pages per Sheet / 4 Pages per Sheet,
8 Pages per Sheet / 9 Pages per Sheet
10% 100 200%
Left to Right / Right to Left
Top to Bottom / Bottom to Top
Across from Left / Down from Left
Across from Right / Down from Right
Setup Value
600dpi / 300dpi
Pattern 1 / Pattern 2 / Smooth
-80% 0 80%
-80% 0 80%
Table 1-7-1
Overlay tab
Setup item
Overlay Placement
Position*
Size**
Unit***
* Default value is the center of the paper.
** Default value is that of file.
*** Default value is in Inch for USA and in Centimeter for other countries.
Setup Value
Background / Foreground
0 < X < 34.00cm
Left
0 < X < 34.00cm
Top
0 < X < 34.00cm
Width
0 < X < 34.00cm
Height
Centimeters / Inches
CHAPTER 1
1 - 61