Table of Contents
Advertisement
If the Printer is Not Using a Hard Disk
If the hard disk has not been installed in the printer, turn off the power as described
in the following procedure.
1
2
If the Printer is Using a Hard Disk (LBP-2810 only)
If the hard disk has been installed in the printer, turn off the power as described in
the following procedure.
IMPORTANT
•
If you attempt to shut down the printer when the paused job data or the secure job data
still remains in the hard disk, the message
シマスカ？ >
erased. However, the job data in the box is left on the hard disk. To resume printing, press
[ オンライン ]
•
Once the shut down procedure has been selected, you cannot cancel the operation. If
you need to turn the printer on again, first turn off the power by following the instructions
on the control panel and then turn the printer on again.
4
Make sure that the
オンライン
ジョブキャンセル
給紙選択
Press the power switch to the "
appears. Once the shut down procedure has been selected, all jobs are
, and go online.
indicator is off.
ジ ジ ジ ジ ョ ョ ョ ョ ブ ブ ブ ブ
00 ｲ ﾝ ｻﾂ ｶ ﾉｳ
印刷可
メッセージ
HDD
" position.
○ ○ ○ ○
< ジョブガ ノコッテイマス ジッコウ
ジョブ
A4
ユーティリティ
セットアップ
ジョブ
リセット
実行
Advertisement
Table of Contents
