Kohler 14RESA Manual page 44

SiteTech Group
Genset System
Configuration
Genset Calibration
* Read Only = Not adjustable
[ Notes indicate applicability to genset model and accessories. N/A = Not applicable to these generator sets.
] See TT-1584 for more information about digital inputs and outputs.
w Load management device (LCM, load shed kit, or RXT with combined interface/ load management board)
44 Section 4 Controller
Parameter
Genset System Voltage
Genset System Frequency
Genset Voltage Phase
Connection
Genset Power Rating
Genset Rated Current
Genset System Battery Voltage
Prime Power Application
Current Transformer Ratio
Local Start Mode
Measurement System
ECM Power
Display Contrast
Genset System Language
Genset Maximum Percent
Capacity
Generator Overloaded Percent
Under Frequency Shed Level
Base Load Add Time
Base Over Load Shed Time
Base Under Frequency Shed
Time
Genset Fuel Type (firmware
versions 4.5 or higher)
Automatic Start Minimum Voltage
Automatic Stop Minimum Percent
Load
Automatic Start Minimum Voltage
Delay
Automatic Stop Minimum Load
Delay
ECM Powered Mode
Genset Calibration Factor Voltage
L1-L2
Genset Calibration Factor Voltage
L2-L3
Genset Calibration Factor Voltage
L3-L1
Genset Calibration Factor Current
L1
Genset Calibration Factor Current
L2
Adjustment
Range *
Units
V 110 -- 600
Hz 50 / 60
Dropdown menu
kW DO NOT CHANGE
A Read Only
V 12 / 24
Standby or prime
Locked
Read Only
English or metric
True or False
0 -- 100
No effect.
% 0 -- 120
% 0 -- 120
Hz 0 -- 5
s 10 -- 2400
s 2 -- 30
s 1 -- 20
Natural Gas or LP
(pulldown)
V 15 -- 60
% 0 -- 100
s 1 -- 3600
s 1 -- 3600
On or Off
0.9 -- 1.1
0.9 -- 1.1
0.9 -- 1.1
0.9 -- 1.1
0.9 -- 1.1
Default
Setting
Notes
[
240.0
60.0
Single
Phase
Auto
select
based on
Load
genset
Mgmt
model and w
fuel type
12
Standby N/A
400 Load
Mgmt
w
Off
English
False N/A
50
English N/A
70.0 Load
Mgmt
w
85.0
0.5
60
30
5
Natural
Gas
51
20
180
180
Off
1.0063
0.9909 3-phase
0.9427 3-phase
1.000000 Load
Mgmt
w
1.000000 N/A
TP-6805 8/15