Kohler 14RESA Manual page 42

SiteTech Group
Genset Run Time
Genset Personality Profile
* Read Only = Not adjustable
[ Notes indicate applicability to genset model and accessories. N/A = Not applicable to these generator sets.
] See TT-1584 for more information about digital inputs and outputs.
w Load management device (LCM, load shed kit, or RXT with combined interface/ load management board)
42 Section 4 Controller
Parameter
Engine Run Time Until
Maintenance
Genset Controller Date Format
Genset Controller Time Format
Genset Date Time of Next
Maintenance
Maintenance Period In Days
Maintenance Period Remaining
Genset Controller Clock Time
Zone Offset
ECM Model
Maximum Alternator Current
Engine Number Of Flywheel
Teeth
Engine Warmed Up Temperature
Engine Cooled Down
Temperature
Engine Crank Disconnect Speed
Engine Idle Speed
Engine Run Speed
Engine Coolant Temperature
Protectives Enabled
Engine Coolant Temperature
Sensor
Engine High Coolant
Temperature Inhibit Delay
Engine Low Coolant Temperature
Warning Delay
Engine High Coolant
Temperature Warning Delay
Engine Low Coolant Temperature
Shutdown Delay
Engine High Coolant
Temperature Shutdown Delay
Engine Low Coolant Temperature
Warning Limit
Engine High Coolant
Temperature Warning Limit
Engine High Coolant
Temperature Shutdown Limit
Engine Coolant Temperature
Deadband
Adjustment
Range *
Units
h Read Only
MM/DD/YYYY or
DD/MM/YYYY
12 or 24 hr
Read Only
days Read Only
s Read Only
Read Only
DO NOT CHANGE
A Read Only
Locked
77 -- 140 _C
_C/F
Locked
_C/F
RPM 300 --1000
RPM DO NOT CHANGE
RPM 1000 -- 3900
No effect
No effect.
s No effect.
s No effect.
s No effect.
s No effect.
s No effect.
No effect.
_C/F
No effect.
_C/F
No effect.
_C/F
No effect.
_C/F
Default
Setting
Notes
[
200.0
MM/DD/
YYYY
12 Hr
N/A
365
31536000
1/1/01
12:00:00
AM
No ECM N/A
920
1
90_C N/A
79_C
750
2700
3600
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
TP-6805 8/15