Canon MultiPASS L6000 User Manual page 23

Press to select the Resolution the MultiPASS will use for the document
4
you are faxing or copying.
ALARM
Flashes when an error occurs, when the MultiPASS is out of paper or ink,
5
or when received faxes are stored in memory.
One-touch Speed Dial/Function buttons
Use for one-touch speed dialing, entering user information, and printing
6
documents stored in memory.
FUNCTION
Use to register user settings or to print faxes stored in the MultiPASS
7
L6000's memory.
Arrow buttons
Use to scroll through menu selections, or to move the cursor when
8
registering data.
STOP
Press to cancel sending, receiving, or any other operation.
9
START/COPY
Press to begin sending, receiving, copying, or other operations, or to select
10
functions when registering information.
CODED DIAL
Press this button (followed by a two-digit code) to dial a number that you
11
have registered for coded speed dialing.
REDIAL/PAUSE
Press to redial the last number that was dialed using the number buttons,
12
or to enter pauses between digits when dialing fax numbers.
Numeric buttons
Use these buttons to enter numbers and names when entering information,
13
and to dial fax/telephone numbers that are not registered for automatic
dialing.
1-8 Introduction
light
button
button
button
button
button
Chapter 1