Loading Paper in the Multi-purpose Tray
The paper you load in the multi-purpose tray is used for printing
documents or for incoming faxes. You can use any plain paper (such
as copier paper).
When the message
add paper to the multi-purpose tray. This tray holds approximately 100
sheets of plain paper.
1
Fan the paper.
2
Open the paper
guides to the
approximate width
of the
stack of paper.
Chapter 1
appears in the LCD display, you need to
LOAD PAPER
For best results, fan the paper before loading it.
Always fan a stack of paper along the edge that will feed
into the MultiPASS first.
Stack the paper so the leading edge and sides are even.
Introduction
1-9